Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Driveway & Pavers: The Riverside Owner’s Guide
We stock and install KraftMaid-compatible driveway and paver replacement parts across Riverside, with typical installed jobs running $5,000 – $14,000 for a full driveway replacement and $250 – $700 for sealing work. Most Riverside homeowners discover a failed part the hard way: a paver edge that’s sunk after winter rains, a crack that’s opened up across the apron, or a seal coat that’s gone chalky under the Inland Empire sun. Here’s what we know about matching the right part to your setup and getting it fixed without a second trip.
Key Takeaways
- KraftMaid driveway and paver systems need specific paver dimensions and base materials to hold up in Riverside’s clay-heavy soil
- Written price before any work starts, every time
- 365-Day Done Right Promise covers the full job, not just the part
- Background-checked, uniformed technicians on every job
Which KraftMaid Models This Applies To
KraftMaid’s driveway and paver line splits into two families: modular concrete pavers (the interlocking units most Riverside homes use for patios, walkways, and driveway aprons) and segmental retaining wall blocks for raised driveways on sloped lots like those in Alessandro Heights or Canyon Crest. The compatibility trap most homeowners hit is paver thickness. Driveway-rated KraftMaid pavers run 60mm to 80mm thick, while patio-grade units are 40mm to 50mm. You can’t swap one for the other and expect the driveway to survive a loaded pickup truck.
To identify what you have, flip over a loose paver. The mold number and thickness are stamped on the underside. We need that number, plus a measurement of the paver’s length and width, to match your part. KraftMaid changed paver molds over the years, and a paver from 2015 won’t always seat cleanly next to one cast in 2023 even if they look identical from above. On the aftermarket side, there are quality equivalents that match KraftMaid’s color families and dimensions, but we recommend OEM for anything under vehicle load. The tolerance differences matter when a paver edge is taking tire pressure every day.
Styles & brands we work with
Signs Your KraftMaid Driveway & Pavers Is Failing
- Edge pavers shifting outward or sinking. This is almost always a base failure underneath, not a bad paver. Riverside’s clay soil expands and contracts with moisture, and if the compacted base was laid thin, the edges go first.
- Hairline cracks running across multiple pavers in a line. A single cracked paver is a paver problem. A crack that jumps from one unit to the next in a straight line means the subgrade moved, and replacing just the cracked pieces will fail again within a season.
- Seal coat turning white or chalky. Riverside’s UV exposure is brutal on sealers. Once the surface goes chalky, the sealer has broken down and water is getting into the paver pores. You’re looking at a re-seal, not a patch.
- Sand washing out between joints after rain. Polymeric sand that keeps washing out means the joints weren’t activated properly or the sand has degraded. Left alone, the pavers start rubbing against each other and chipping edges.
- Standing water pooling on the surface. Driveway pavers should shed water on a slight grade. Pooling means the base has settled unevenly or the original install didn’t account for Riverside’s drainage patterns.
Replacement Cost & What’s Included
Installed paver driveway replacement in Riverside runs $7,000 – $18,000 depending on square footage, paver thickness, and how much base work is needed. Concrete driveway replacement comes in at $4,500 – $12,000. Asphalt paving falls between $3,500 and $9,000. Sealing a driveway runs $250 – $700. The range is driven by what’s under the surface: if the existing base is sound, we pull the old pavers, re-grade, and re-lay. If the base has failed, we’re excavating and rebuilding it, which is most of the labor on any paver job.
Every quote includes parts, labor, haul-off of old material, and a written line-item price before any work starts. The 365-Day Done Right Promise covers the full job: if the repair fails inside a year, we come back and correct it at no charge. We also stock KraftMaid-compatible pavers, joint sand, and edge restraints on our trucks, so most Riverside jobs don’t wait on a parts order.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely check a few things yourself: measure your paver dimensions, confirm the thickness stamped on the underside, and note whether the failing area is under vehicle load or foot traffic only. That information helps us quote accurately over the phone.
Where DIY goes wrong on driveway pavers is the base. If you pull up sunken pavers and add sand on top of a failed subgrade, you’ll be back out there in six months looking at the same sag. Rebuilding a compacted base means excavation, correct aggregate, and plate compaction in lifts. Get that wrong and the new pavers fail faster than the old ones did. If you suspect the base has moved, call us at (424) 567-8472 and we’ll send a technician to look at what’s actually under the surface before anyone quotes a repair.
FAQs
With a proper base and an annual inspection, KraftMaid driveway pavers in Riverside last 20 to 30 years. The base fails before the pavers do, and Riverside’s clay soil shortens base life if drainage wasn’t handled correctly at install. Call (424) 567-8472 and we’ll tell you honestly whether your base is holding up or getting close to done.
Yes, if the failure is isolated and the surrounding base is stable, we can pull and re-lay a section. The catch is color matching older pavers, which have faded in the Riverside sun; new units will read darker for a season or two before they catch up. Call us at (424) 567-8472 for a written price on the section you need.
A typical Riverside driveway replacement takes 2 to 4 working days, depending on square footage, base repair, and access. We sequence the job so the old surface is out, the base is rebuilt, and new pavers are laid and compacted in one pass. You’ll know the schedule before we start.
We stock KraftMaid-compatible pavers, polymeric joint sand, edge restraints, and base aggregate on our trucks for most Riverside service calls. Odd mold numbers or discontinued colors may require a parts order, and we’ll tell you that upfront before you commit.
Call Bradford Remodeling Co Riverside
If your KraftMaid driveway or paver system is failing, call (424) 567-8472 for a free estimate. Curtis Lane and the team at Bradford Remodeling Co Riverside work by The Garrison Standard: straight number, real scope, no surprises at the final walk. We’re an independent service provider, not affiliated with KraftMaid, and we also stock parts for Cambria, Silestone, and Kohler. A real person answers the phone 24/7, and your written price comes before any work starts.
Written by Curtis Lane, Owner, Bradford Remodeling Co Riverside at Bradford Remodeling Co Riverside, serving Riverside and nearby areas.
