Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Driveway & Pavers: The Riverside Owner’s Guide
PGT driveway and paver work in Riverside typically runs $7,000 to $18,000 installed, depending on square footage, base prep, and the paver profile you’re matching. We stock common PGT-compatible profiles and can usually have a crew out within a week for a site measure and written quote. Most Riverside homeowners call us after a hard rain exposes a sunken paver, a sprinkler leak washes out the base, or a delivery truck cracks a section near the curb line.
The part that fails first is almost never the paver itself. It’s what sits underneath: the base, the bedding sand, or the edge restraint. Riverside’s clay-heavy soil expands and contracts through summer heat and winter rain, and that movement works pavers loose over time. When you call us, we check the whole section, not just the paver you tripped on.
Which PGT Models This Applies To
PGT manufactures a range of concrete paver profiles for driveways, patios, and walkways, and the compatibility question usually comes down to profile, thickness, and color blend rather than a single “model number.” We work with PGT’s standard driveway-rated pavers, which are typically 60mm or 80mm thick, versus the 40mm profiles meant for foot traffic only. If the wrong thickness went in originally, that’s the root cause of most failures we see in Riverside.
To match an existing PGT section, we look for the manufacturer stamp on the underside of a loose paver, measure the profile dimensions, and match the color blend from PGT’s current catalog. One Riverside reality worth knowing: pavers fade under our sun, so a brand-new paver dropped into a five-year-old driveway will show. That’s why we pull replacements from the edges or from a less visible area and lay new material there instead, a trick that keeps the whole field looking uniform. If an exact match isn’t available because the profile was discontinued, we’ll walk you through aftermarket equivalents from Belgard or Unilock that carry their own specifications and warranties.
Styles & brands we work with
Signs Your PGT Driveway & Pavers Is Failing
- Sunken or settled areas near the center or edges of the driveway. This is base failure. Riverside’s clay soil plus inadequate compaction from the original install is almost always the cause. Water pools in the low spot, and the problem accelerates.
- Pavers shifting or rocking underfoot. Rocking pavers mean the bedding sand has washed out or was never properly screeded. Left alone, the pavers crack at the edges from unsupported load.
- Gaps opening between pavers or at the edge restraint. Edge restraint failure lets the whole field drift. You’ll see the outer rows spreading toward the lawn or the street.
- Cracked pavers in the wheel path. Riverside drives see real vehicle weight, and a 40mm paver meant for a patio will crack in the wheel track. We see this all the time in older Riverside neighborhoods where someone cut a corner on spec.
- Efflorescence or color wash-out across the field. Not structural, but it tells you the sealant has failed and the surface is absorbing water. In Riverside’s heat-cold cycles, that absorbed water is what spalls and pits the surface over time.
Replacement Cost & What’s Included
A PGT driveway replacement in Riverside runs $7,000 to $18,000 installed. A smaller repair section, where we lift and reset existing pavers on a recompacted base, typically lands on the lower end of that range or below, depending on square footage. What drives the number: the thickness of the paver profile, how deep we have to excavate to reach stable soil, whether the old base material can be reused or needs to be hauled off, and access to the site.
Every quote from Bradford Remodeling Co Riverside is a written, line-item number before any work starts. That means you see the cost of base rock, sand, pavers, edge restraint, and labor separately, and that number does not change at the door. The job closes with a documented scope and a signed written guarantee in your hand, backed by the 365-Day Done Right Promise. If the work fails inside that year, we come back and correct it at no charge.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
A homeowner can safely lift a single broken paver, check whether the sand underneath has washed out, and clean out a clogged joint. That’s honest diagnostic work, and we’ll never tell you not to look at your own driveway. Where DIY goes wrong is when the base has failed. You can’t recompact a base through a hole the size of one paver, and resetting a paver on loose fill just kicks the problem six months down the road.
If you’re seeing sunken areas, spreading edges, or pavers cracking in the wheel path, the fix requires excavation, a plate compactor, and a proper base rebuild. That’s not a weekend project. Curtis Lane and the crew at Bradford Remodeling Co Riverside have been doing paver work in Riverside long enough to know what the clay does to a bad base. Call (424) 567-8472 and we’ll put a straight number in writing.
FAQs
A properly installed PGT driveway paver should last 20 to 25 years in Riverside’s climate, with the base lasting even longer. The pavers themselves rarely wear out; what fails is the base, the bedding sand, or the edge restraint. We see original bases fail in 8 to 12 years when the soil wasn’t properly compacted or drainage wasn’t handled at the time of install. Call (424) 567-8472 for a free inspection and we’ll tell you exactly what you’re looking at.
Yes, when the failure is isolated, we can lift and reset individual sections of a PGT driveway on a recompacted base and match the existing profile and color blend. If the failure runs across multiple sections or the edge restraint has let go around the entire field, a full replacement is usually the honest answer because partial fixes on a moving base won’t hold. We’ll show you the difference on site before you commit to anything.
A standard PGT driveway replacement in Riverside takes 3 to 5 working days, depending on the size of the field and how much old base material needs to be excavated and hauled off. The sequence is: saw-cut and demo, base excavation, recompaction, paver installation, edge restraint, and final compaction with sand sweep. We sequence the job so the driveway is usable again as soon as we’re done, and the punch list closes before we call the project complete.
We keep common PGT profiles and color blends in stock at our Riverside yard, and we can typically source less common or discontinued profiles through our supply relationships within a week. For aftermarket equivalents where PGT has discontinued a line, we carry Belgard and Unilock profiles as well as brands like KraftMaid, Cambria, and Silestone for interior work. If we don’t have the exact paver on hand, we’ll tell you that on the first call and give you a real lead time.
Written by Curtis Lane, Owner, Bradford Remodeling Co Riverside at Bradford Remodeling Co Riverside, serving Riverside and nearby areas.
Get Your Free PGT Driveway Estimate
If your PGT driveway or pavers are failing, don’t guess at the cause. Call Bradford Remodeling Co Riverside at (424) 567-8472 and we’ll schedule a free site measure, give you a written line-item price, and tell you exactly what’s wrong in plain English. Straight number, real scope, no surprises at the final walk.
