Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Kitchen Remodeling: The Riverside Owner’s Guide
CGI kitchen remodeling in Riverside typically runs $14,000 to $45,000 installed, depending on cabinet line, countertop material, and how much structural or electrical work the space needs. A partial refresh that keeps the existing layout can land closer to $9,000 to $20,000, while a full gut-and-rebuild with an island and custom cabinetry sits at the higher end. Most Riverside homeowners realize they need this work when a cabinet face delaminates, a sink base shows water damage, or the countertop seam has opened up enough to catch a fingernail. The good news: we carry CGI-compatible cabinetry hardware and millwork in our Riverside shop, and Curtis Lane can usually put a written number in front of you within a day or two of measuring.
Which CGI Models This Applies To
CGI cabinetry runs on a few distinct series lines, and the compatibility gotcha matters. The most common lines we see in Riverside kitchens are the CGI Classic line (framed, 3/4-inch face frames) and the CGI Euro line (frameless, full-overlay doors with concealed hinges). The two are not interchangeable: Classic door hinges mount to the face frame, while Euro hinges require a 35mm cup bore drilled into the door back. If you’re replacing doors or hardware, match the series first. Look inside the sink base cabinet for a white or silver label with the model code; if it’s missing, measure the door overlay. A full-overlay Euro door covers the cabinet box edge almost entirely, leaving about a 1/8-inch reveal. We also keep KraftMaid, Cambria, and Silestone product lines on our approved materials roster, so if a CGI cabinet box is sound but doors are tired, we can price a door-and-drawer reface against a full replacement so you’re not guessing at value.
Styles & brands we work with
Signs Your CGI Kitchen Remodeling Is Failing
- Delaminated door edges or peeling laminate. Riverside’s dry heat and hard-water evaporative stress hit laminate edges first. Water vapor creeps between the surface layer and the substrate, and the edge lifts. Once the substrate swells, the door won’t sit flat again.
- Sink base with a soft floor or water staining. A slow drain leak or failed sink seal rots the cabinet base over months. The first sign is a musty smell when you open the door, followed by the floor feeling spongy under a can of cleaner.
- Drawer glides that grind or bind. CGI drawers use side-mount or undermount glides depending on series. When a glide bends or loses its ball bearings, the drawer drags to one side. Forcing it will tear the drawer box runners.
- Countertop seams opening or lippage at the joint. A seam you can catch with a fingernail means the adhesive has let go. In Riverside’s temperature swings, a failed seam that goes unsealed pulls water and grease into the joint line.
- Hinges that sag or jam. Older CGI Classic hinges use a clip design that gets sloppy with age. Doors start rubbing the frame, then the hinge screw holes strip out of the face frame altogether.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Riverside pricing for a full CGI-compatible kitchen remodel sits at $14,000 to $45,000 installed. The main drivers are cabinet count and line, countertop material, and whether we’re moving plumbing or the range. Here’s how the line items shake out:
- Small kitchen remodel: $9,000 – $20,000
- Cabinet installation: $4,000 – $13,000
- Countertop installation: $2,000 – $6,500
- Backsplash installation: $800 – $2,500
- Kitchen island installation: $3,000 – $10,000
Every number above is parts plus labor, in writing, before the first tool comes out. No change orders that move the price at the door. And every completed kitchen carries our 365-Day Done Right Promise: if work fails inside a year, we come back and correct it at no charge. That’s the Garrison Standard, and it’s part of why we’ve been doing this since 2004.
DIY or Call Us?
Some things a homeowner can safely inspect. Confirm the cabinet boxes are square by checking door reveals. Look under the sink with a flashlight for the first trace of water staining. You can note which drawers bind and which doors swing. That’s useful information for a written estimate. But replacing cabinet boxes, setting countertop over new cabinets, or moving plumbing and electrical rough-in is not a weekend project. Kitchen work gets into wall substrate, load-bearing soffits, and gas line clearances around the range. If you get the countertop seam wrong, you’ll chase water damage for years. Call (424) 567-8472 and we’ll send a uniformed, background-checked tech to measure, confirm your CGI series, and give you a straight number with no surprises at the final walk.
FAQs
CGI cabinet boxes typically hold for 20 to 25 years, while doors and drawer fronts start showing their age at 12 to 15 years in Riverside’s dry inland climate. The weak points are laminate edges and sink base floors. Call (424) 567-8472 for an exact condition assessment on your cabinets.
Most delaminated doors can’t be repaired to hold well, because once the substrate absorbs moisture, the surface never bonds flat again. We can price a door reface against a full replacement so you’re choosing based on real numbers. Call (424) 567-8472 for a written quote either way.
A full CGI-compatible kitchen remodel in Riverside typically runs three to six weeks depending on cabinet lead time, countertop templating, and whether plumbing or electrical moves. Curtis Lane sequences every job by trade so subs arrive in order and the punch list closes before we call it done.
We stock common CGI-compatible hardware, drawer glides, hinges, and cabinet touch-up kits in our Riverside shop. For full cabinet replacement we order direct and handle the spec sheet for you. Call (424) 567-8472 to schedule your free estimate.
Written by Curtis Lane, Owner, Bradford Remodeling Co Riverside at Bradford Remodeling Co Riverside, serving Riverside and nearby areas.
