Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterCabinet Installation & Refacing in Riverside, CA
Cabinet installation and refacing in Riverside typically runs $4,200 to $11,800 for a full kitchen, with refacing landing between $3,100 and $7,400 depending on door style, finish, and lineal footage. Installation-only projects, where the cabinets are already purchased and sitting in your garage, usually cost $1,800 to $4,600. Bradford Remodeling Co Riverside puts a written price in your hand before a single tool comes out, so the number we quote is the number you pay. If you’re weighing cabinets as part of a larger project, start with our Kitchen Remodeling in Riverside page for the full picture, or call (424) 567-8472 to talk specifics.
Riverside homeowners deal with a specific set of cabinet problems. Heat and low humidity in the Inland Empire dry out solid wood doors, which leads to hairline cracks at the joints and finish wear along the bottom rails. Homes built in the 1970s and 1980s in neighborhoods like Canyon Crest, Victoria, and La Sierra often have oak face-frame cabinets that are structurally sound but visually dated. Those are prime refacing candidates. We replace the doors, drawer fronts, and veneer the exposed frames, and the kitchen looks rebuilt without the cost or demolition of Full Kitchen Remodeling.
Our home base is right here in Riverside, and we’ve been doing kitchen cabinets long enough to know what the local stock looks like and what it takes to fix it properly.
When You Need Cabinet Installation & Refacing
You don’t always need full Kitchen Remodeling. Here’s when cabinet work solves the problem on its own:
- Doors are delaminating or the finish is worn through. The box is fine, but the doors show oil stains, water damage, or sun fade, especially on east-facing Riverside kitchens that catch morning light off the hills.
- Drawer slides are binding or the faces are separating from the box. Old side-mount slides wear out and the drawer front starts to sag. We see this constantly in 1990s-era homes in Orangecrest and Mission Grove.
- You bought cabinets and need them installed correctly. Box-store cabinets assembled by hand need a level substrate and proper shimming or the doors will never align. We install what you bought and stand behind the installation.
- The layout works but the style doesn’t. If your kitchen’s footprint and plumbing rough-in are solid, refacing gets you new doors, soft-close hinges, and a modern finish for roughly half the cost of new cabinets.
- You’re selling or renting soon. Riverside buyers and renters notice kitchens first. A reface or a targeted install of new uppers and lowers can change the walkthrough dynamic without a six-figure remodel.
- Water damage is confined to the sink base. A single rotted cabinet doesn’t mean the whole kitchen goes. We can build and install a matching replacement box, set the sink, and keep the rest of the run intact.
Our Cabinet Installation & Refacing Process
Here’s exactly how a cabinet job runs with Bradford Remodeling Co Riverside:
- Scope walk and measurements. We measure every run, check for out-of-level floors (common in older Riverside slab homes), and note ceiling height, soffit depth, and any electrical or plumbing that sits inside the cabinet footprint. You get a written scope.
- Written price, guaranteed. Before any work begins, you receive a line-item price for materials and labor. That number does not move at the door. No add-on surprises, no “we found something” conversations that double the bill.
- Material selection and ordering. We work with documented brands like KraftMaid and Wellborn cabinetry, Cambria and Caesarstone for any countertop tie-in, and Kohler or Moen for hardware. Everything is traceable with manufacturer specs and warranties.
- Installation day. Clean, level, square. We shim the boxes to level on both planes, fasten through the face frames into studs, and set doors and drawer fronts so reveals are consistent. For refacing, we veneer the exposed frames, install new doors and hardware, and adjust every hinge.
- Job close with the guarantee in your hand. The site is swept, the boxes are wiped down, and you sign off on a written 365-Day Done Right Promise. If anything fails inside that year, we come back and fix it at no charge. That’s The Garrison Standard, and it applies to every cabinet job we close.
Cabinet Installation & Refacing Pricing in Riverside
Here’s what cabinet work costs in the Riverside market as of this year:
| Project Type | Typical Range |
|---|---|
| Installation only (labor, homeowner-provided cabinets) | $1,800 – $4,600 |
| Full refacing, laminate or veneer doors | $3,100 – $5,800 |
| Full refacing, solid wood doors and upgraded hinges | $4,200 – $7,400 |
| New cabinet install, mid-grade stock or semi-custom | $4,200 – $8,200 |
| New cabinet install, custom or premium semi-custom | $7,500 – $11,800+ |
What moves the number: door material (thermofoil is cheapest, paint-grade maple mid-range, solid hardwood highest), lineal footage, hinge hardware, crown molding or light rail, and whether the existing boxes need repair before we reface them. Riverside homes with slab foundations often have settled floors; if we’re installing and the base cabinets need extensive shimming to level, that’s additional labor we’ll see coming and spell out in the written price.
Estimates are free. Call (424) 567-8472 and we’ll schedule the walk, put the number in writing, and you decide from there with zero pressure.
FAQs – Cabinet Installation & Refacing
Is it cheaper to reface or replace cabinets in Riverside?
Refacing costs roughly 40 – 55% less than a full replacement, which means a typical Cabinets & Countertops job that would run $9,000 to replace drops to $4,200 – $5,800 to reface with laminate doors. Solid wood refaced doors push toward $7,400 but still undercut new semi-custom cabinets. Call (424) 567-8472 and we’ll price both options so you can decide on real numbers.
Can you install cabinets the same day they’re delivered?
If the cabinets are on site and the room is prepped, an install-only job in Riverside often takes one to two days from first box opened to doors adjusted. Larger kitchens with crown molding, pantry cabinets, or appliance panels can run three days. We’ll give you a schedule in the written scope before we start.
How much does it cost to reface kitchen cabinets in Riverside?
Refacing costs $3,100 to $7,400 depending on door material, hardware, and lineal footage, with most Riverside kitchens landing between $4,200 and $5,800. That includes veneering exposed frames, new doors and drawer fronts, soft-close hinges, and new pulls. Estimates are free and the price is in writing before work begins.
Do you guarantee cabinet installation work?
Every cabinet installation and refacing project carries the 365-Day Done Right Promise, a written one-year guarantee. If a hinge fails, a door rubs, a drawer binds, or any part of our workmanship doesn’t hold within that year, Bradford Remodeling Co Riverside returns and corrects it at no charge. That’s the standard Curtis Lane built this company on, and it’s in writing on every job.
Can you match new cabinets to existing ones?
Matching depends on the original manufacturer and finish. For KraftMaid or Wellborn lines where the original door style is still produced, we can order exact matches. For discontinued styles, we’ll show you the closest current door profile and finish options, and we’ll tell you honestly if a match won’t look right before you spend money.
Will my kitchen be usable during refacing?
During a reface, the cabinet boxes stay in place, so your sink and appliances remain connected. There’s dust and some disruption, but most Riverside homeowners keep using their kitchen during the day and we clean the work area before we leave each night. We’ll walk you through the daily schedule before we start.
What “Squared Away” Looks Like at Job Close
This is what you get from Bradford Remodeling Co Riverside when the last hinge is adjusted:
- A clean site. No sawdust in the drawers, no stray screws on the counter, no cabinet boxes stacked in the driveway.
- Doors and drawer fronts aligned with even reveals. If a door sits crooked, we fix it before we call the job done, not after you flag it.
- Soft-close hinges tested on every door. Drawer slides adjusted so every drawer closes flush and stays closed.
- Hardware set square and tight. No wobbly knobs, no pulls mounted at slightly different heights.
- The signed 365-Day Done Right Promise in your hand, with the scope of work and the guarantee terms in writing.
Curtis Lane runs every Riverside cabinet job to The Garrison Code: discipline over shortcuts, written commitments over handshakes, and a site you can walk through without finding something to fix. That’s not extra service. That’s the baseline.
Get a Written Price for Your Riverside Cabinet Job
Call (424) 567-8472 and tell us what you’re dealing with: doors that need replacing, a full reface, or Kitchen Design & Layout help for cabinets sitting in boxes that need a skilled installer. We’ll schedule the walk, measure the job, and hand you a written price. No pressure, no re-pricing at the door, and a full-year guarantee on every installation and reface we close. That’s how cabinet work should go in Riverside.
Written by Curtis Lane, Owner at Bradford Remodeling Co Riverside, serving Riverside.
