Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Paver Patio Installation Cost in Riverside?
Paver patio installation in Riverside typically costs between $3,500 and $11,000, with most homeowners landing in the $6,000 to $8,500 range for a standard 300 to 400 square foot patio using mid-grade concrete pavers. The price per square foot runs $12 to $28 installed, depending on paver type, site prep, and whether you add features like a fire pit or built-in seating. You’ll get a written price before any work starts when you call Bradford Remodeling Co Riverside at (424) 567-8472.
Paver Patio Installation Cost Breakdown (2026)
| Line Item | Low End | High End |
|---|---|---|
| Site prep (excavation, grading, haul-away) | $600 | $2,200 |
| Base material (crushed rock, sand, compaction) | $450 | $1,400 |
| Concrete pavers (standard, 2-3/8″ thick) | $1,800 | $4,500 |
| Premium pavers (tumbled, travertine, or Belgard styles) | $3,000 | $7,500 |
| Edge restraints and joint sand | $150 | $400 |
| Labor (installation crew) | $1,500 | $3,800 |
| Optional: fire pit, seating wall, or steps | $800 | $4,000 |
| Total Typical Range | $3,500 | $11,000 |
The spread comes down to three things in the Riverside market: the paver you choose, the condition of the soil under the patio, and how much elevation change the site has. A flat backyard in Canyon Crest with clean soil and standard Belgard pavers will land near the bottom of the range. A sloped lot in the Wood Streets that needs retaining blocks, extra base compaction, and tumbled stone will push past $10,000 fast.
What Affects Paver Patio Installation Pricing in Riverside
- Paver material and brand. Standard concrete pavers run $6 to $10 per square foot for material alone. Tumbled or travertine-look pavers from Belgard or Unilock run $12 to $22 per square foot. The brand matters because it carries manufacturer specs and warranties that back our own written guarantee.
- Soil conditions and base depth. Riverside sits on a mix of decomposed granite and sandy loam, but some neighborhoods, especially near the Santa Ana River basin, have expansive clay that shifts with moisture. We over-excavate and add crushed rock base in those zones, which adds $400 to $1,200 depending on patio size.
- Slope and drainage. A patio that needs to shed water away from the house or tie into existing drainage will require more grading and possibly a French drain. In hilly areas like Alessandro Heights, site work is often 20 to 30 percent of the total job.
- Patio size and shape. Curves and radius cuts take more cutting and fitting than a square or rectangle. A 500-square-foot L-shaped patio with rounded corners costs proportionally more per square foot than a simple 300-square-foot rectangle.
- Permits and code requirements. Most paver patios in Riverside don’t require a permit if they’re at grade and under 30 inches in height, but if you’re adding a pergola, outdoor kitchen, or any structure tied to the house, the city will want plans. Factor $300 to $2,000 for permit fees depending on scope.
- Access to the backyard. If the crew can’t get a skid steer or mini excavator through a side gate, material has to be wheelbarrowed in by hand. We flag this during the estimate so it’s in the written price, not a surprise at the end.
How to Save on Paver Patio Installation
The smartest way to control cost is to nail down the scope before excavation starts. Every change order after demo day costs more than the same decision made on paper. Beyond that, here’s what actually moves the needle in Riverside:
- Pick a mid-grade concrete paver. You get the same structural base, same compaction, same warranty coverage from us. The paver itself is the easiest place to trim $1,500 to $3,000 without cutting the quality of the installation.
- Keep the footprint rectangular. Straight lines mean less cutting, less waste, and fewer labor hours. If you can live without radius curves, you’ll save 8 to 12 percent.
- Skip the built-ins for now. A fire pit or seating wall adds $800 to $4,000 to the job. The base and patio can be installed first, and the features added later. We’ll still cover the original paver work under the 365-Day Done Right Promise.
- Get the written price before you commit. Bradford Remodeling Co Riverside puts every number in writing before a single tool comes out. No numbers that move at the door. No change orders you didn’t approve. That’s The Garrison Standard, and it’s the difference between a $6,500 patio that costs $6,500 and a “$5,000 deal” that costs $9,000 by the time the crew leaves.
Call (424) 567-8472 for a free estimate. A real person answers, 24/7, and the estimate is yours whether or not you move forward with us.
Paver Patio Installation Cost FAQs
How much should I budget per square foot for a paver patio in Riverside?
Plan on $12 to $28 per square foot installed in 2026. That includes excavation, base, pavers, joint sand, and labor. A 300-square-foot patio at $18 per square foot lands at $5,400; the same patio in tumbled travertine-look pavers at $28 per square foot lands at $8,400. For an exact number, call (424) 567-8472 and we’ll give you a written price.
Is a paver patio cheaper than stamped concrete?
At the low end, stamped concrete runs $10 to $18 per square foot in Riverside, which undercuts pavers by a few dollars. But pavers are repairable: if a paver cracks, we lift it, replace it, and re-set the base. If stamped concrete cracks, you’re looking at patching that never matches. Pavers also handle Riverside’s temperature swings better because the joints absorb movement that solid slabs don’t. Over a 20-year horizon, pavers usually cost less per year of service.
How long does paver patio installation take?
A standard 300 to 400 square foot patio takes 2 to 4 days of crew time in Riverside, weather permitting. Day one is excavation and base, day two is paver laying and cutting, day three is joint sand, compaction, and final walkthrough. If the site needs retaining blocks or drainage work, add a day or two. We’ll give you a schedule in writing with your estimate, and we show up when we say we will.
Do I need a permit for a paver patio in Riverside?
Most ground-level paver patios under 30 inches in height don’t require a city permit. Structures attached to the patio, like pergolas, outdoor kitchens, or gas fire pits, generally do. Bradford Remodeling Co Riverside handles the permit application as part of the written scope of work, so you’re not guessing which box to check at the city counter.
What does the warranty cover?
Every patio Bradford Remodeling Co Riverside installs carries the 365-Day Done Right Promise: if the work fails within one year of completion, we come back and correct it at no charge. That covers sinking, joint failure, loose pavers, and drainage problems caused by our installation. It’s in writing, dated, and signed before we hand you the final invoice. The paver manufacturers also carry their own product warranties of 10 years to lifetime depending on brand, and we’ll register those in your name.
Why Riverside Homeowners Call Bradford Remodeling
Bradford Remodeling Co Riverside has been part of the Garrison Partners family since 2004, and every job is held to The Garrison Standard. That means a written price before any work starts. A signed 365-Day Done Right Promise on every completed project. Background-checked, uniformed technicians who show up on time and leave the site squared away at close: clean ground, documented scope, and the written guarantee in your hand.
Our crews install Belgard and Unilock pavers, which carry manufacturer warranties we can point to by name. We don’t bid-and-hope. We write down what we’re going to do, we do it, and we stand behind it for a full year. If you’ve been burned by a contractor who no-showed or re-priced at the door, that’s the job we fix first.
Ready for a real number? Call (424) 567-8472. A live person answers 24/7, and estimates are free. No pressure, no games. Just a straight price in writing.
Pricing reflects the Riverside market as of 2026. Bradford Remodeling Co Riverside offers free estimates, call (424) 567-8472.
Written by Curtis Lane, Owner at Bradford Remodeling Co Riverside, serving Riverside since 2004.
What Our Customers Say
"Respectful crew. Covered the floors and swept every day."
- Jackie T."Home remodel with a new floor plan. Handled structural work and permits without drama."
- Gus R."Painting and drywall repair were flawless. They patched the drywall seams and the paint matches the old wall."
- Cal P.
